Bookin’ It: Another Last-Minute Gift Idea for Fabric Lovers

Remember this package from my Tuesday post?

December 17_package complete

Well, if you recall, I promised to reveal the contents in today’s posting. But first a little background. I’m lucky enough to be part of a group of five creative women who meet from time to time to share our latest projects, offer inspiration (and–occasionally–moral support), and just to enjoy each other’s company. Each year we plan a holiday dinner to celebrate our friendship and to participate in a secret Santa exchange. As we’re all avid quilters, it’s not unusual for some–if not all–gifts to be items we’ve crafted ourselves.

This year, I drew Kim Butterworth as my “giftee.” Here’s what Kim found inside that package.

My secret Santa gift for Kim

My secret Santa gift for Kim

I love the idea of keeping a special book as a journal, sketchbook, or idea book, and–as Kim is a super creative lady–I suspected she might too. Rather than purchasing a decorative book from a stationer or bookstore, I thought it would be fun to create something more personal. Here’s how I did it.

You'll need a book, fabric for cover and lining, fusible web, cotton batting, a length of coordinating ribbon, and matching thread.

You’ll need a book, fabric for cover and lining, fusible web, cotton batting, a length of coordinating ribbon, and matching thread.

The cut sizes of the cover and lining fabrics, fusible, and batting will depend upon the size of the book you plan to cover. The book I chose measured approximately 6″ x 8 1/2″, with a 1/2″ wide spine. We’ll use that for our example.

Figuring Measurements and Cutting

(Tip:  Keep track of the measurements by writing them down and labeling them as you go.)

1. Double the width of the cover and add the width of the spine. To this figure, add 6″ for the book flaps and 2″ for turnover allowance. Label this measurement A. (Example:  6″ width of book x 2 = 12″ + 1/2″spine + 6″ flaps + 2″ turnover = 20 1/2″.)

2. Add 2″ to the length of the book for turnover allowance, and then add another 1/2″ for “wiggle room.” Label this measurement B. (Example: 8 1/2″ length of book + 2″ turnover + 1/2″ wiggle room = 11″.)

3. Cut the cover fabric and one piece of lightweight fusible equal to measurement A x measurement B. (Example: 20 1/2″ x 11″.)

4. Subtract 2″ from measurement A. (Example, 20 1/2″ – 2″ = 18 1/2″). Label this measurement C.

5. Subtract 2″ from measurement B. (Example, 11″ – 2″ = 9″.) Label this measurement D.

6. Cut one piece each of cotton batting, fusible web, and lining fabric equal to measurement C x measurement D. (Example, 18 1/2″ x 9″.)

No more math. Now comes the fun part!

Making the Book Cover

(Note: Construction is similar to that used for the checkbook cover I shared with you last December.)

1. Fuse the lining fabric, right side up, to the batting using the matching-sized piece of fusible web.

2. Apply the larger (matching-sized) piece of fusible web to the wrong side of the cover fabric.

3. Center the prepared batting, lining side up, over the fusible-web side of the prepared cover fabric. Starting with the two long sides, turn the cover fabric to the lining; press to fuse. Repeat for both short sides, squaring the corners; press. Clip excess fabric at the corners on the diagonal.

December 20_clipped corner 2

4. Fold the unit in half, lining sides together; press. Unfold, and then fold both ends of the unit inward 3″; press. Insert the book to check for fit.

December 20_fitting cover_1

5. Remove the book; refold the cover. Measure and mark the center of the front and back of the cover (not the flaps) for ribbon placement.

December 20_marking cover for ribbon

6. Center a length of decorative ribbon over the marked guideline, making sure to leave tails for tying. Use matching thread to stitch the ribbon to the front and back cover.

December 20_ribbon sewn7. Quilt and/or embellish as desired. I used stencils to trace and fuse Kim’s name to the front cover. An embroidered monogram, rows of decorative stitching, lace, buttons, and beads are just a few other options. Be creative!

December 20_cover KIM

8. Refold the two flaps back toward the center, lining sides together. Starting with a few backstitches, topstitch a 1/8″ seam all around the perimeter of the unit.  Finish with a few backstitches.

December 20_inside cover

Insert the book, tie the ribbons, and your gift is complete!

The finished book, shown here with my great-grandfather's fountain pen

The finished book, shown here with my great-grandfather’s fountain pen

I hope you find time for some stitching this holiday season! Best wishes . . . Darra-signature

P.S. Click here to read Jennifer’s earlier profile of Kim Butterworth, and to see some of her wonderful work.

About these ads
This entry was posted in Embellishments, Fabric, Projects, Tutorials and tagged , , , , . Bookmark the permalink.

One Response to Bookin’ It: Another Last-Minute Gift Idea for Fabric Lovers

  1. Pingback: Inspiration Plus: Putting Those Decorative Machine Stitches to Work |

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s