In my last post, I included a short video that Pati and I recently made. In the video I suggest to Pati that we share with you some of the steps we each use in designing our quilts. I looked through the very first quilting book I ever purchased, “The Quilters” by Patricia Cooper and Norma Bradley Buferd and was intrigued by an image of the quilt labeled as “Tumbling Diamonds”. The credit indicates the quilt is from Texas around 1910 and in the Cooper and Buferd Collection. I suggested to Pati that we use this pattern and challenge ourselves to make blocks using some current fabrics.
Here are the 5 new fabrics that I selected for our projects. Since I failed to include the names of the fabric manufacturers and designers on the video, I am adding them here, just in case you are interested in adding some of these beauties to your stash.
- White multi-print – “London Calling” (Spice) by Robert Kaufman
- Black floral – “London Calling” (orchid) by Robert Kaufman
- Pink with bowls – “Zephyr” by Rashida Coleman Hale for Cotton and Steel
- Green/Yellow geometric – “Birch Farm – Chicken Coop” by Joel Dewberry for Free Spirit
- Navy with letters – “Playful” by Melody Miller for Cotton and Steel
Often we find patterns or inspiration in a book, magazine or an online source. Making a traditional pieced block without a pattern or instructions can be a bit challenging. It’s nice to at least have a starting point so I consulted my two usual resource books. I was not successful in finding this exact block. I did however, find one in Jinny Beyer’s book that is very close. It is called “Roads to Berlin” and listed under the 4-patch category of blocks. I could easily draft a block similar to Tumbling Diamonds using the diagram shown. But my stubborn self likes a challenge so I decide to attempt drafting it as close to the original as possible Note that the diamonds are both long and not pieced, as shown in the quilt pattern.
In this post I will share with you how I drafted the Tumbling Diamonds block and then determined the cutting sizes of the fabric shapes. My next post will include tips on block construction as well as some fun setting options. I hope you might be tempted and inspired to play along and make one for yourself.
I did play with this pattern on graph paper, but found the sizes to be challenging, especially when working with the pieced diamonds. So, rather than working in the traditional way of marking a finished size block onto graph paper and then filling in the shapes, I decided to start by drafting the pieced diamonds and build from there to complete the block. This is definitely not my usual way, but it worked great for this block and I too learned something along the way.
My goal was to both use easy to cut measurements and strip-piece the two fabrics together that are used for the diamonds. I randomly decided to make make each small diamond 1″ finished, and started the drafting process, as shown. I know that many of you skilled with design programs can do this much quicker and easier than this, but I’m one of those old-school girl types! I enjoy working with graph paper and pencil. Either way, I hope you might give this a try.
Step One: Mark a corner of the block, then a 45-degree angle line from the corner into the center. Finally, mark two parallel lines, 1″ apart, as shown.
Step Two: Mark two additional diagonal lines, as shown. This completes one pieced diamond.
Step Three: Use the 45-degree marking on your ruler to add more lines, as shown. These lines determine the finished size of the quilt block. This one is 6-7/8″ x 6-7/8″.
Step Four: Refer to the photos to continue marking lines to complete the shapes in this block.
Step Five: This photo includes all the markings needed to define the shapes in the block. The shapes are labeled, A, B & C and cutting measurements included. Note that the A diamonds are labeled 1 & @ to indicate that two fabrics are used.
Here’s an easy reference chart for cutting fabric shapes to make one Tumbling Diamonds block. I am also including cutting measurements for a 10-3/8″ finished block, just in case you are interested in making a larger block but want to avoid the drafting process ; ). Get your fabrics out and start cutting. I know you will enjoy the process.
To make one 6-7/8″ x 6-7/8″ finished block
A-1 & A-2: One 1-1/2″ x 42″ strip, from each of two fabrics
B: One 5-1/4″ square. Cut the square twice, into quarters diagonally.
C: One 3-3/8″ square
To make one 10-3/8″ x 10-3/8″ finished block
A-1 & A-2: One 2″ x 42″ strip, from each of two fabrics
B: One 7-1/4″ square. Cut the square twice, into quarters diagonally.
C: One 4-7/8″ square.
Be sure to check back as my next post will include helpful hints for construction and setting options. Following that, Pati will share her block using the same inspiration pattern and fabrics. I can’t wait to see what she comes up with, and hope you will feel the same.